INHYDRO Cable Purlin Shade Net House | Low-Cost & MIDH Subsidy Ready
Best Crops for CABLE PURLIN Shade Net House
| Crop Category | Best Crops |
|---|---|
| Vegetables | Capsicum, Cucumber, Tomato |
| Leafy Greens | Spinach, Lettuce, etc. |
| Flowers | Gerbera, Rose, etc. |
| Nursery | Nursery plants |
| Herbs | Basil, Mint, etc. |
| Fruits | Strawberry, Melon (early stage) |
The INHYDRO Cable Purlin Shade Net House is a government-approved, low-cost solution for protected cultivation. This MIDH subsidy-ready design uses high-tensile cable purlins to provide an affordable entry for nurseries and leafy green farming.
Built with UV stabilized netting and GI columns, it creates a stable micro-climate for your crops. This durable, hybrid system protects vegetable seedlings from heat and pests while ensuring long-term structural integrity.
Secure your agriculture subsidy and maximize ROI with this budget-friendly protected farming structure. It is the ideal choice for growers seeking high yields and professional results with the lowest initial investment.
₹880,000.00 – ₹3,520,000.00
Why INHYDRO for Your Net House Project?
Technical Standards –
CABLE PURLIN Shade Net House
| Parameter | NHB Technical Requirement |
|---|---|
| Structure Type | Shade Net House – Type 3 (Naturally Ventilated) |
| Structural Shape | Dome / Curved Roof Design |
| Frame Material | Galvanized Iron (GI) Pipes |
| Purlins | High-Tensile GI Cables |
| Design Life (Structure) | 10+ years with proper maintenance |
| Welding | Welded pipes not permitted except base plate |
| Wind Load Resistance | 80–130 km/hr (as per wind zone) |
| Bay Width | 8–10 meters (typical) |
| Column Spacing | 3–4 meters |
| Ridge Height | 4.5 – 6.5 meters from ground level |
| Orientation | Preferably North–South |
| Ventilation Type | Manual or automatic side curtains |
| Minimum Vent Area | 20–25% of floor area |
| Side Curtains | Roll-up (Manual / Mechanized) |
| Covering | UV-Stabilized Polyfilm (150–200 micron) |
NHB & MIDH Subsidy Ready: Our structures strictly follow National Horticulture Board technical standards .
- Project Planning & DPR Support: We provide the Detailed Project Reports (DPR) and technical drawings required for smooth government approvals and bank loans.
- End-to-End Execution & Quality Control: We manage the complete project lifecycle—from material procurement and fabrication to on-site installation and final inspection—ensuring structural accuracy, durability, and long-term performance.
Project Gallery: NHB-Approved Shade Net House Installations
Standard sizes with indicative pricing as per government benchmark rates
The pricing mentioned below is based on the government approved benchmark rate for Dome Shape Shade Net House as prescribed under NHB and respective State Horticulture Department guidelines. The approved rate of ₹700 per square meter is applicable for protected cultivation structures constructed through empanelled agencies and includes the complete development of the shade net house. This cost covers the supply and erection of the hot dip galvanized GI structure, RCC foundation work, UV stabilized HDPE shade net, and all required accessories necessary for a functional and subsidy-compliant net house.
| Size (Sq.M) | Approx. Area | Rate (₹/Sq.M) | Total Price (₹) | Subsidy(in %) |
|---|---|---|---|---|
| 2000 Sq.M | ~0.5 Acre | ₹440 | ₹8,80,000 | up to 50% |
| 4000 Sq.M | ~1 Acre | ₹440 | ₹17,60,000 | up to 50% |
| 8000 Sq.M | ~2 Acres | ₹440 | ₹35,20,000 | up to 50% |
Maximize Your ROI with Inhydro Protected Cultivation
The Inhydro Bamboo / Cable Purlin Shade Net House is a strategic investment for farmers moving toward commercial agriculture. By controlling the environment, you aren't just growing crops—you are securing your financial future against climate change and market price fluctuations.
Full Subsidy & Financial Assistance
Navigating government schemes can be difficult. At Inhydro, we simplify the process for you:
-
Government Approval: Our structures are engineered to meet NHB (National Horticulture Board) and MIDH technical specifications, ensuring your project is 100% eligible for state and central subsidies.
-
Documentation Support: We provide the necessary Detailed Project Reports (DPR), structural drawings, and technical certificates required by banks for loan approvals.
Why Inhydro Engineering Beats Local Fabricators
-
Rust-Free Longevity: We use only Hot-Dip Galvanized (GI) pipes with high zinc coating. Unlike local paint-coated pipes, our frames resist corrosion for over 15-20 years in humid farm conditions.
-
Smart Assembly: Our "Nut-Bolt" assembly system avoids on-site welding. Welding burns off the protective zinc coating and leads to early rusting; our system keeps the structural integrity intact.
-
Climate Resilience: The dome shape creates a "chimney effect" for natural ventilation, reducing internal temperatures by 3°C to 5°C during peak summer, which is critical for Capsicum and Floriculture success.
Our Commitment to Your Farm
We don't just supply materials; we partner with you from site leveling and structural design to final installation. Our goal is to ensure your net house provides a stable, high-yield environment for year-round harvesting, regardless of the weather outside.
| Weight | 18.5 kg |
|---|---|
| Project Size | 2000 Sq.M, 4000 Sq.M, 8000 Sq.M |
Add a review
Additional Technical Specifications & Government Compliance Standards
The Inhydro Cable Purlin Shade Net House is designed in accordance with NHB (National Horticulture Board) and MIDH protected cultivation guidelines. The structure utilizes HDG steel columns with GI cable-based purlin support, offering a cost-effective solution while maintaining structural stability and subsidy eligibility, with a service life of
12–15 years.
1️⃣ Structural & Design Specifications
| Parameter | Specification |
|---|---|
| Structural Design | Cable Purlin Shade Net House |
| Roof Type | Flat / Slight Slope (Cable Supported) |
| Ventilation | Natural Side & Top Ventilation |
| Orientation | North–South (Recommended) |
| Grid / Bay Size | 4.0 m × 4.0 m |
| Column Spacing | 4.0 meters |
| Structure Height | 3.0 – 3.5 meters |
| Wind Resistance | Up to 90–100 km/hr |
| Design Life | 12–15 years (GI Structure) |
2️⃣ Structural Pipe & Cable Specifications (Critical for Subsidy)
| Structural Member | Specification | Material | Remarks |
|---|---|---|---|
| Main Columns | 60 mm OD × 2.0 mm | HDG Steel | Primary load bearing |
| Foundation Insert Pipe | 60 mm OD × 2.0 mm | HDG Steel | Embedded in RCC footing |
| Side Bracing Pipes | 32–33 mm OD × 2.0 mm | HDG Steel | Lateral stability |
| Cable Purlins | 3–4 mm GI Wire Rope | Galvanized Steel Cable | Roof shade net support |
| Cross Bracing Cable | 3 mm GI Cable | Galvanized Steel | Wind load resistance |
| Curtain Support Pipe | 32 mm OD | HDG Steel | Side ventilation control |
3️⃣ Pipe, Cable & Coating Standards
| Parameter | Standard |
|---|---|
| Pipe Type | Circular GI / HDG Steel Pipes |
| Cable Type | Galvanized Steel Wire Rope |
| Galvanization Method | Hot Dip Galvanized |
| Zinc Coating | Minimum 80–120 GSM |
| Cable Fixing Method | Turnbuckle, Clamp & Tensioning System |
| Welding | Not permitted (as per subsidy norms) |
| Corrosion Protection | Mandatory |
4️⃣ Shade Net Specifications
| Parameter | Specification |
|---|---|
| Shade Net Material | UV Stabilized HDPE |
| Shade Factor Options | 35% / 50% / 75% |
| Roof Net GSM | Minimum 90–100 GSM |
| Side Net GSM | Minimum 75 GSM |
| Net Color | Green / White / Black |
| UV Life | 3–5 years |
5️⃣ Foundation & Civil Works
| Item | Specification |
|---|---|
| Foundation Type | RCC Isolated Footing |
| Concrete Grade | Minimum M20 |
| Footing Depth | 600–900 mm (Soil dependent) |
| Column Fixing | Insert pipe embedded in concrete |
| Purpose | Load transfer & wind stability |
6️⃣ Irrigation & Accessories (Optional)
| System | Status |
|---|---|
| Drip Irrigation System | Optional |
| Foggers / Misting System | Optional |
| Mainline, Sub-main & Laterals | Optional |
| Valves & Fittings | Optional |
7️⃣ Scope of Supply & Installation
| Item | Included |
|---|---|
| Structural material & erection | ✅ |
| Cable purlin system installation | ✅ |
| Shade net supply & fixing | ✅ |
| Civil foundation work | ✅ |
| Installation & commissioning | ✅ |
| Inspection & subsidy readiness | ✅ |
8️⃣ Exclusions
| Item | Status |
|---|---|
| Planting material / seedlings | ❌ Not Included |
| Fertilizers & pesticides | ❌ Not Included |
| Electricity & water connection | ❌ Not Included |
| Post-planting crop management | ❌ Not Included |
A Cable Purlin Shade Net House is a modern protected cultivation structure where high-tensile steel cables replace traditional MS purlins. This design provides better load distribution, higher wind resistance, and cost efficiency, making it ideal for commercial vegetable, flower, and nursery farming.
The cable purlin system reduces steel usage, improves structural flexibility, and absorbs wind pressure more efficiently. Compared to conventional MS purlins, it offers lower construction cost, faster installation, and longer life, especially in high-wind agricultural zones.
Cable purlin shade net houses are ideal for:
Vegetables: Capsicum, Cucumber, Tomato, Chilli
Flowers: Gerbera, Rose, Carnation
Fruits: Strawberry, Papaya (nursery stage)
Nurseries: Vegetable seedlings, fruit saplings, ornamental plants
These crops benefit from controlled light, temperature, and airflow.
The recommended shade net percentage depends on the crop:
35%–50% for vegetables
50%–75% for flowers and nurseries
75%+ for hardening nurseries and sensitive plants
Proper shade percentage improves yield, crop quality, and plant health.
Yes, Cable Purlin Shade Net Houses are specifically designed for Indian weather conditions. They perform well in high temperature, heavy wind, and semi-arid regions, making them suitable across most Indian states.
Yes, it is eligible under NHB, MIDH, and State Horticulture Department subsidy schemes, subject to state norms and guidelines. Subsidy percentage varies based on farmer category and location.
Yes, it is eligible under NHB, MIDH, and State Horticulture Department subsidy schemes, subject to state norms and guidelines. Subsidy percentage varies based on farmer category and location.
The average cost ranges between ₹440to ₹460 per square meter, depending on:
Structure size
Shade net percentage
Location
Subsidy availability
Actual cost may reduce significantly after subsidy.
A Cable Purlin Shade Net House uses steel cables for roof support, whereas flat roof shade net houses use MS purlins. Cable purlin structures offer better wind resistance, lower steel consumption, and cost efficiency.
Yes. The flexible cable system absorbs and distributes wind pressure, making it highly suitable for open and windy locations compared to rigid structures.
Yes, Cable Purlin Shade Net Houses fully support drip irrigation, fogging, misting, sprinkler, and fertigation systems, which improve water efficiency and crop productivity.
Common commercial sizes are:
1000 sqm
2000 sqm
4000 sqm
The size can be customized based on land availability, crop planning, and subsidy norms.
Farmers can achieve 30%–60% higher yield compared to open-field farming due to controlled environment, reduced pest attack, and better moisture management.
Contact Us For More Information Regarding our Hydroponic projects with our team which consists of experts and well-trained professionals to provide services of the highest quality.
Reviews
There are no reviews yet.