Grow lettuce, herbs and leafy greens in your NFT system with the INHYDRO 3 Meter HDPE NFT Channel with End Caps, also known as a hydroponic NFT channel or NFT grow channel. A thin film of nutrient solution flows along the channel and past the roots, so plants get water, nutrients and air at the same time. It is used in home, terrace, greenhouse and commercial hydroponic setups.
The channel is made from HDPE (High-Density Polyethylene), which handles impact, corrosion and sun exposure better than a standard PVC NFT channel. The smooth inside surface keeps the flow even, helps reduce clogging, and is easy to rinse between crop cycles. The included end caps fit onto the channel ends to help keep the nutrient solution inside.
These NFT channels for hydroponics are commonly used for lettuce, spinach, kale, basil, mint, coriander, pak choi, strawberries and microgreens. Whether you are replacing a hydroponic PVC channel, building DIY NFT channels, or expanding a larger farm, measure your net pot size and check the slope and run length of your system before ordering.
Smooth Flow
for Healthy Roots
The smooth inside surface lets a thin film of nutrient solution flow evenly past the roots. It helps reduce clogging and is easy to rinse between crop cycles in your NFT system.
Durable HDPE
Build
Made from strong, lightweight HDPE that handles impact and corrosion better than a standard PVC NFT channel. A good choice for home, terrace, greenhouse and commercial setups.
End Caps Included
for Easy Setup
Each 3 meter channel comes with end caps that fit snugly to help keep the nutrient solution inside. Quick to install for beginners and growers expanding a larger farm.
HOW TO USE INHYDRO 3 METER HDPE NFT CHANNEL
Plan Your Layout
Decide where the channels will sit and how many you need. Allow space for the water tank, pump and return line.
Connect the Water Supply
Connect the pump and tubing so nutrient solution enters at the high end and drains back to the tank from the low end.
Clean the Channels
Rinse the channels with clean water before first use so they are free of dust and ready for your nutrient solution.
Place Your Plants
Set seedlings in net pots with your chosen growing media and fit them into the channel openings so the roots reach the flowing solution.
Set a Gentle Slope
Mount the channels on a stand with a slight slope, commonly 1:30 to 1:40, so the solution flows smoothly from one end to the other.
Check the Flow
Run the pump and look for a thin, steady film of solution along the channel floor. Adjust the flow rate or slope as your crop needs.
Fit the End Caps
Press the end caps firmly onto the channel ends, adding inlet and drain fittings as your system design requires.
Clean Between Crops
After harvest, remove the plants and media, then rinse and sanitize the channels before starting your next crop.
Smooth Flow for Healthy Roots
The INHYDRO 3 Meter HDPE NFT Channel carries a thin, continuous film of nutrient solution past the plant roots, so they get water, nutrients and air at the same time. The smooth inside surface keeps the flow even, helps reduce clogging, and is easy to rinse between crop cycles. For best results, mount the channel with a gentle slope and match the flow rate to your crop.
Durable HDPE with End Caps Included
Made from HDPE (High-Density Polyethylene), this channel handles impact, corrosion and sun exposure better than a standard PVC NFT channel, while staying light enough to handle and install easily. The included end caps fit snugly on the channel ends to help keep the nutrient solution inside, so setup is quick for beginners and professional growers alike.
Grow Leafy Greens at Any Scale
Use a few channels on a terrace or build a full greenhouse or vertical farm system. These NFT channels for hydroponics are commonly used for lettuce, spinach, kale, basil, mint, coriander, pak choi, strawberries and microgreens. Add more channels as your system grows, and match them to your net pots, tray layout and water supply.
What's Included
- Pack – 1 INHYDRO 3 meter HDPE NFT channel with end caps included
- Size – Length 300 cm, width 5.2 cm and height 10.2 cm
- Shape – Open-top channel with a smooth inside surface for even nutrient flow
- Holes – ___ holes for net pots along the channel
- Material – Durable HDPE that resists impact and corrosion
- Colour Options – Green, cyan, grey, red, white and yellow
Why People Love This Vertical Hydroponic Garden
| Parameter | Specification |
|---|---|
| Brand | Inhydro |
| Quantity | 1 Channel with End Caps |
| Weight | ___ kg |
| Length | 3 meter (300 cm) |
| Width | 5.2 cm |
| Height | 10.2 cm |
| No of Holes | ___ |
| Material | HDPE |
| Color | Green, Cyan, Grey, Red, White, Yellow |
INHYDRO 3 METER HDPE NFT CHANNEL
The INHYDRO 3 Meter HDPE NFT Channel with End Caps, also known as a hydroponic NFT channel or NFT grow channel, carries a thin film of nutrient solution past the plant roots so they get water, nutrients and air together. Made from durable HDPE with a smooth inside surface, it supports even flow and is easy to clean. The included end caps help keep the solution inside. It is commonly used for lettuce, herbs, leafy greens and strawberries in home, greenhouse and commercial NFT systems.
WHERE YOU CAN USE THIS NFT CHANNEL
- Home & Terrace Gardens – Grow lettuce, herbs and leafy greens in a compact hydroponic NFT channel setup
- Greenhouse Cultivation – Build rows of NFT channels for hydroponics inside a greenhouse
- Commercial Hydroponic Farms – Expand with more channels as your production grows
- Vertical Farming Systems – Mount channels on stacked racks to save floor space
- DIY & Educational Projects – Build DIY NFT channels for school, college or learning setups
HOW TO USE INHYDRO NFT CHANNEL
- Plan & Clean – Decide your layout and rinse the channels with clean water before first use
- Set the Slope – Mount the channels on a stand with a gentle slope, commonly 1:30 to 1:40
- Fit the End Caps – Press the end caps onto the channel ends and add inlet and drain fittings
- Connect & Plant – Connect the pump and place seedlings in net pots into the channel holes
- Check & Clean – Check the flow regularly and rinse the channels between crops
The INHYDRO 3 Meter HDPE NFT Channel with End Caps, also called a hydroponic NFT channel or NFT grow channel, carries a thin film of nutrient solution past the plant roots so they get water, nutrients and air together. Each channel comes with end caps included, so it is ready to use in home, terrace, greenhouse and commercial NFT systems.
The smooth inside surface keeps the flow even and is easy to rinse between crop cycles. Made from durable HDPE, it handles impact and corrosion better than a standard PVC NFT channel. Use these NFT channels for hydroponics for lettuce, herbs, leafy greens, strawberries and microgreens, whether you are building DIY NFT channels or expanding a larger farm.
What’s Included
- ✓1 NFT Channel – One INHYDRO 3 meter HDPE NFT channel
- ✓End Caps – End caps included for the channel ends
- ✓Size – Length 300 cm, width 5.2 cm, height 10.2 cm
- ✓Holes – ___ holes for net pots along the channel
- ✓Colours – Green, cyan, grey, red, white and yellow
- ✓Weight – ___ kg
Why Use HDPE NFT Channel
- ✓Smooth Nutrient Flow – A smooth inside surface for an even thin film of solution
- ✓Durable HDPE – Resists impact and corrosion better than standard PVC
- ✓Lightweight – Easy to handle, mount and install on a stand
- ✓Snug End Caps – Help keep the nutrient solution inside the channel
- ✓Many Plants – Lettuce, herbs, leafy greens, strawberries and microgreens
- ✓Easy to Clean – Rinse and sanitize between crops
Q1. What is an NFT channel?
An NFT channel is a sloped channel that carries a thin, continuous film of nutrient solution past plant roots in a hydroponic system. The roots take in water, nutrients and air from the flowing film.
Q2. What is the size of the INHYDRO 3 meter NFT channel?
Each channel is 3 meters (300 cm) long, 5.2 cm wide and 10.2 cm high. Check the Additional Information tab for the number of holes and weight.
Q3. Are end caps included with the channel?
Yes. End caps are included with each INHYDRO 3 meter HDPE NFT channel. They fit onto the channel ends to help keep the nutrient solution inside.
Q4. What is the HDPE NFT channel made of?
It is made of HDPE (High-Density Polyethylene), a strong, lightweight plastic. HDPE handles impact, corrosion and sun exposure better than a standard PVC NFT channel.
Q5. What slope should I use for NFT channels?
A gentle slope of about 1:30 to 1:40 is commonly used so the nutrient solution flows smoothly from the inlet end to the drain end. Adjust the slope and flow rate to suit your crop and channel length.
Q6. Which plants can I grow in NFT channels for hydroponics?
NFT channels work well for lettuce, spinach, kale, basil, mint, coriander, pak choi, strawberries and microgreens, along with other leafy greens and herbs.
Q7. Can I use net pots with this channel?
Yes. The channel has holes along its length for net pots. Measure your net pot and compare it with the hole size before ordering. INHYDRO 2-inch net pots are available on our site.
Q8. Can I use this hydroponic NFT channel outdoors?
Yes, it can be used in terrace, greenhouse and outdoor setups. HDPE handles sun exposure better than standard PVC, but a shaded or covered area helps keep the nutrient solution cooler for your plants.
Q9. Which colours are available?
INHYDRO NFT channels are available in green, cyan, grey, red, white and yellow. Choose your colour from the options on the product page.
Q10. How do I clean the channel between crops?
After harvest, remove the plants and growing media, then rinse the channel with clean water and sanitize it before your next crop. The smooth inside surface makes cleaning easy.
Reviews
There are no reviews yet.